The process of taking out the upper surface of the floor by using abrasive materials like glass paper or sandpaper is known as floor sanding. Floors made up of parquet, particleboard, cork or timber can be sanded by using this process. This process involves 3 steps and they are known as preparation, sanding and then coating the floor with a shielding sealant. This process is executed by using some specialized machines called sanding machines. The process gets completed with the usages of different machines in its various stages. It’s a completely machine-driven process but requires special expertise for its execution. If you want to do some floor sanding or polishing to restore or repair the floor then you need to hire some concrete polishing company. They will polish and sand your floor with some machines and it will cost few amounts only.
Know more about the process
The process of floor sanding starts with the step called preparation. In this step experts firstly punch down all the protruding nails which are there above the surface of the floor board. This is done in order to safeguard the sanding machine. Then all the tacks and staples which were used to fasten the older covering are also removed. Existing adhesives also need to be removed before using the sanding machine. Initially experts use coarse grit papers to take off the older coating and then it is ensured that the floor is flat. Then boards with uneven heights are also removed. Experts always use large sized sanders on the grain of the timber.
How sanding helps in floor renovation
Floor sanding is required for getting a flawless floor. There are many experts available in the market to offer you the best sanding services, but by appointing the best sanding specialist you will be able to get multiple benefits.
Base shoe underneath the baseboards are removed during the process of sanding which enables a person to get flawless and even flooring. This is the best solution when there is quarter round molding under the baseboard of your floor.
With the help of the process of sanding people are able to get rid of stains on the floors. Stains due to water, tea or coffee can be removed by using some kinds of bleach solutions but stains due to acidic liquids like pet urine can never be removed with such solutions. The only way out to remove such scars is to renovate your floor through the process of sanding and get a brand new and glossy flooring.
Sanding process from the experts will help you to get dust free services in most efficient manner. With the help of this process the floors can be renovated in such a manner that it starts looking a new one.
Getting prepared for sanding process
Once you have decided to renovate your floor through sanding process then it is highly advisable to get prepared before the execution starts.
Cover air grilles and switch off the HVAC machines in order to prevent the dust flow during the sanding process.
If you have any door which opens inside the room then it is always wiser to get it removed before the floor renovation starts because sanding the area underneath the doors is not feasible.
Loose boards should always be nailed properly and the nails should be properly countersunk before starting using the sanding machine.
The last step to finish the process of floor renovation through sanding is to investigate thoroughly if there are any swirls left on the floor.
Now you can hire some floor sanding professional to do this task and they can suggest you the best possible solutions according to your budget.
Comments