Types of Plastering for Commercial Buildings

A plasterer will take care of the process that renders the coarse surface of the ceiling roofs or walls into something that is smooth. At the start, the wet materials would be spread all over the brick or block works and the required equipment is then used to smoothen it out. The purpose of this process is to ensure that a smooth and hard surface which will have a good aesthetic appearance and it can be painted.

Various Types of plastering available in the market:

When it comes to choosing what plasterer to use, you should make sure that you are aware of the types that are commonly used. Some of them include:

1. Wood lath

2. Layer method

3. Fiberglass based

4. Gypsum board based

All of these have various materials that are used in the creation of the material, including lime, cement, and even sand. Ensure that you are using the right base material when applying it to the various wall types. There are also various finishes that you can choose from, such as:

1. Textured

2. Depeter

3. Scrapped

4. Pebbledash

5. Sand faced

6. Roughcast

7. Smooth cast

Choose the best plastering work:

#1 Lime Based The mixture that is lime based and used for all plasterer work has both lime and sand in it. The mixture is a ratio of 1:3 in terms of sand and lime based on the volume. This type of mixture can be used for both the undercoating as well as the final coating. However, this option sometimes shrinks, so you should make sure that you have applied extra and have an additional mixture to cover any shrinking or cracking.

#2 Cement and Sand Based The expert plasterer will know just what should be done with the material using sand. This mixture is most often used on the walls that have a hard background such as partitions or brick walls. This combination can be plastic and an experienced worker should make sure that they are mixing the ingredients together using the required volume ratio, which is 1:0.25 for cement and lime or 1 part cement to 4 parts of sand along with plasticizer.

There are a few steps that are required when you are using this type of material that you should know about, including:

1. 
   

Using a 1:4 cement and coarse sand mixture as the initial coating, which would remain for 7 days

1. 
   

The 2nd coating applied using a sponge when this coating is wet, which helps to keep the look of the sand uniform and equal

When you are using this method, then you would need to keep it watered for around 15 before you can do any other work on it. The expert plasterer will be able to help you with all of this and ensure that you are using the right material. It is suggested to hire the experienced plasterers to do these works and they can complete your plastering works professionally. Apart from that, for the commercial building, you need to maintain some building rules and regulation implemented by the local government authority, and these norms can be maintained by a certified plasterer only.

You should make sure that when it comes to all restoration work in your home that you are hiring the best plasterer to help you with the walls. They would know about type of material would work the best and what finish would look perfect. They are also experts at mixing the proper materials together since they require special ratios of the materials, such as sand, lime, cement and more. The type of wall would help to determine just what material can be used and the desired finish is something that you can pick.